HP Laserjet M605 Shuts down when you turn it on.

[rapidocument]

HP M605, you turn it on and starts initializing, after the 1...2...3...sequence shuts down (all of a sudden),

Manual says to update the firmware but the problem is that it doesn't reach ready state to do so.

Any ideas are welcomed,
Thankyou,

[Lance15]

Re: HP Laserjet M605 Shuts down when you turn it on.

Try going into the preboot menu. If it still shuts off while in the preboot menu, there could be a power issue (outlet, PSU).

[Lance15]

Re: HP Laserjet M605 Shuts down when you turn it on.

Try going into the preboot menu. If it still shuts off while in the preboot menu, there could be a power issue (outlet, PSU).

You can also install the latest firmware in the preboot menu.

[Wild Bill]

Re: HP Laserjet M605 Shuts down when you turn it on.

Try the Pre-Boot method,
Turn the Power on. Press the Stop button when the Ready, Data and Attention LEDs illuminate solid. I think...
Good luck

[Wild Bill]

Re: HP Laserjet M605 Shuts down when you turn it on.

you beat me lance haha!!