hello everyone
this machine is not fusing labels! i've fitted a new fuser unit and updated the firmware and even if i set the paper to the thickest (170 - 200 gsm) the print speed slows down appropriately, but it just won't fuse as per attachment
LaserJet Ent M610.pdf
any suggestions?
thanks in advance
this machine is not fusing labels! i've fitted a new fuser unit and updated the firmware and even if i set the paper to the thickest (170 - 200 gsm) the print speed slows down appropriately, but it just won't fuse as per attachment
LaserJet Ent M610.pdf
any suggestions?
thanks in advance