HP laser jet MFP M130fn fuser replacement. would you do it??

[tonerjockey]

I wrote an estimate for this and hoped the customer would say no. told them is wasn't advisable due to the cost of the machine.
now they want it.
the service manual section for the fuser removal is 62 pages.
the you tube video was 15 minutes, and didn't seem to remove all the stuff like LVPS, ECB etc. to remove it that HP lists.

is this job worth the risk for a one hour labor rate and a small part mark up??

kinda like the Fujitsu scan snap transport rollers.

thank you

[Lance15]

I've got an M130fw sitting next to me that I use. The only PARTS I would replace are the pickup roller and separation pad for the printer or ADF. Anything beyond that would cost more than the printer is worth.

[tonerjockey]

ok, thank you Lance15.
i made a mistake letting them decide, and now i will need to decide and inform them.

have a nice day.

[tonerjockey]

so, it was pretty strait forward and easy. i think i was in and out in 1.5 hours. had a weird CQ issue after, but i think it was the drum shutter scraping the perfused paper. pulled drum and toner out and reseated and it was fine.

but i still cant understand why they paid that much to repair an old cheap machine??

Ka Ching