M452DN display blank

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • copyman
    Owner / Technician

    Site Contributor
    2,500+ Posts
    • Sep 2005
    • 4149

    M452DN display blank

    Anyone know the part # for the ribbon cable that goes from formatter to the "2 line" display control panel. Think there are 6 foil contacts on ribbon. The only one I found in parts manual looks to have 22 foil contacts?

    Thanks in advance
  • Tom
    Trusted Tech

    Site Contributor
    250+ Posts
    • Jan 2009
    • 340

    #2
    Re: M452DN display blank

    There are a couple cables available on Ebay for those models, but I don't think that's one of them. I always try to keep one for parts once the fuser goes out, the fusers don't last long like they did on the older models. I've never had that issue, I may have one I can ship you if you can't find it, you pay for shipping though. I don't need money for the cable.

    Comment

    • copyman
      Owner / Technician

      Site Contributor
      2,500+ Posts
      • Sep 2005
      • 4149

      #3
      Re: M452DN display blank

      Originally posted by Tom
      There are a couple cables available on Ebay for those models, but I don't think that's one of them. I always try to keep one for parts once the fuser goes out, the fusers don't last long like they did on the older models. I've never had that issue, I may have one I can ship you if you can't find it, you pay for shipping though. I don't need money for the cable.
      Hi Tom,

      Thank you for the kind offer. I was able to get the cable from Metro Fuser, replaced and all good now.

      Take care

      Comment

      Working...