I am working on a 4200 that the tray will not lift on. I replaced the lift motor and it still will not work. It plugs into the DC controller so that would be my next thing to replace, however since I can't return the DC controller if I buy it, I was wondering if someone else has had this problem.
-
The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking -
You guessed rite. That is the board. Had one of these. motor was cheap but not the problem.
-
TRAY
Have you install another tray and see if it worked?Comment
-
Yes I swapped trays first. I just did not want to find out there was some magic reset I did not know about, I have had a lot of firmware issues lately on HP. Thanks for the replies.The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen HawkingComment
-
I also believe you are on the right path... been awhile, but I think I had one of these also a long time ago. A init wouldn't hurt, but I don't think that helps with mech failures on HP's all that much. Let us know how you make out.The glass maybe half full, but less is more...
Printer + Fax + Copier = Jack Of Many Trades,
but Master Of None
Color Copier = Not A Color Printer
InkJet MFP = Not A Fax Machine
B/W Copier = Not A Press
Finisher = Deal Closer (salesman, not accessory)
Copier Tech = Admin's Stress Ball (Scapegoat)Comment
Comment