If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
My 3700 printer produces mixed-color lines vertically. It also prints a blur image of the previous page. The attached sample came out from a blank page print (it shows the vertical lines along two sides prominently).
Hey, I worked on one of these a while back, same problem, if i remember correctly from the service manual force a calibration, clean density sensor, if problem most likely is the transfer belt, but there could be more things contributing to this issue here is a link to the service manual, good luck
Comment