Machine was working OK but after rebuilding the Paper Feed Assy #1 it shows:
Error light is on (Achtung) and the progress bar stays as in the picture.
Also, during install the machine had to be moved to another workplace and in the process it suffered a light jolt on the left lower corner where the mains connector is located. (it slipped out my f#cking rheumatic hands)
Except of a slightly cracked cover there is no indication of other mechanical damage.
Hans
Error light is on (Achtung) and the progress bar stays as in the picture.
Also, during install the machine had to be moved to another workplace and in the process it suffered a light jolt on the left lower corner where the mains connector is located. (it slipped out my f#cking rheumatic hands)
Except of a slightly cracked cover there is no indication of other mechanical damage.Hans
“
Comment