I replaced the feed tires and sep pad and it continues to jam. Tried to calibrate and couldn't get it to work "Calibration Failed" Any help is GREATLY Appreciated... Thanks
-
-
Re: LJ M 3035xs ADF Feeds 3 copies then says jammed
What jam code? What paper source? What is the exact message being displayed on the screen?
Print off the Error List to see what jams you've had. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: LJ M 3035xs ADF Feeds 3 copies then says jammed
Thanks for the advice... You know, you get so buried in this stuff, it helps to step back and look at it logically. Actually I think it is the feed rollers in the ADF assembly have gotten real dirty. I am cleaning them and throwing it back together and seeing how it goes.Comment
Comment