Re: HP clj 2600n
Before they send a print job to the printer they have the option of just printing in black and white or color. It is a setting in the print driver printing preferences.
-
Re: HP clj 2600n
Tnx for replying
But it seems that it was something else
That printer has separate solenoids for drive black developing cyl. and for driving cmy dev. cyl.
and one for cmy was sticky
At least I didnt have a complain - for now
Leave a comment:
-
Re: HP clj 2600n
Remove and install new drivers it sounds like the one you have is corrupt
.
With the new drivers go in and check all the default settings and set them to the customers liking!Leave a comment:
-
Re: HP clj 2600n
I'm not sure but I think there is a menu setting to print in black and white only. Some menu pages will still print in color, but others only black and white when this is enabled. Use the sm to find where it is in the menu and make sure it is disabled.Leave a comment:
-
Re: HP clj 2600n
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Leave a comment:
-
HP clj 2600n
I have a problem with a color laser printer HP2600
After printing about 10 to 15 perfect color pages (some times after 3)
but generaly first pages that came out are perfect
it start to print only with black cartridge - no traces of CMY
Printers demo, status and supplies pages are ok
Optics are cleaned and firmware upgraded
Cartridges are original
Any idea???
Leave a comment: