Laserjet 9050 ( 3000 sheet stapler stacker )

[copyman]

Indicating that the lower finisher tray is full. I blew out the sensors best I could. I didn't have torx drivers with me to take covers off and investigate further. Have to go back.


Was able to get one set to staple after blowing out sensors but message came back up right after stapled set was ejected onto lower tray.

Account is far away and wanted to know if there is anything common that goes bad, sensors etc.

Thanks in advance

[JustManuals]

Re: Laserjet 9050 ( 3000 sheet stapler stacker )

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com