jamming at fuser (hp3035)

[theengel]

Re: jamming at fuser (hp3035)

Does the M3035 give a detailed jam code on the screen? I don't think it does, but I can't remember. The detailed jam codes are in the config sheet and error report... which can't be printed.

[mem.npr]

Re: jamming at fuser (hp3035)

If no jam code is displayed you can still view the error log in troubleshooting.

[theengel]

Re: jamming at fuser (hp3035)

That's right... forgot about that.

[faxman28]

Re: jamming at fuser (hp3035)

exactly.. i activated all the sensors so that the machine thinks that there is a toner cartrdge inside..

you have another issue in printer, if this is an hp m3035 the toner cart is detected by the drum ground and the memory tag(as hp supply)

Below is from the m3035 service manual.


The device detects the print cartridge by

detecting a voltage differential within the

cartridge. The photo-conductive drum

connected to the high-voltage power supply

provides the reference with which to measure

the differential

[Wild Bill]

Re: jamming at fuser (hp3035)

You can view the error log or print it fyi

[eliaso]

Re: jamming at fuser (hp3035)

hello

there is no grease in the fuser unit (between the fuser sleeve film and the heater)
and the paper go slowly and make a jam

[eliaso]

Re: jamming at fuser (hp3035)

hello there is no grease in the fuser unit (between the fuser sleeve film and the heater) and the paper go slowly and it jam

[eliaso]

Re: jamming at fuser (hp3035)

and also the fixing bouching of lhe lower roller if are bad cause this problem