Hi Guys,
New here and I've come seeking advice!
I have a HP CM6040F MFP with a 10.10.00 error (memory supplies) , which is an error relating to the e-chip on the black toner cartridge. The error occurred on a genuine HP cartridge, so I replaced it with a brand new genuine HP cartridge and the error still remained.
I've since replaced the board with chip reader/contacts on (cartridge interface board RM1-3283), as well as the Memory Tag PCB (RM1-3585-000CN) and the error is still here.
I'm now at a loss to what is the cause of this damned problem. I've searched high and low on the internet (and the service manual!) to no avail! The next logical step (in my head, at least) is to replace the DC Controller.
Has anyone here have any advice to offer?
Many Thanks
Gavin
New here and I've come seeking advice!
I have a HP CM6040F MFP with a 10.10.00 error (memory supplies) , which is an error relating to the e-chip on the black toner cartridge. The error occurred on a genuine HP cartridge, so I replaced it with a brand new genuine HP cartridge and the error still remained.
I've since replaced the board with chip reader/contacts on (cartridge interface board RM1-3283), as well as the Memory Tag PCB (RM1-3585-000CN) and the error is still here.
I'm now at a loss to what is the cause of this damned problem. I've searched high and low on the internet (and the service manual!) to no avail! The next logical step (in my head, at least) is to replace the DC Controller.
Has anyone here have any advice to offer?
Many Thanks
Gavin
Comment