4700 60.02 code, need second opinion.

[prntrfxr]

Re: 4700 60.02 code, need second opinion.

I may have missed something when scanning the previous posts, but you're saying the problem only occurs when printing from tray 1? Did you replace tray 2? It is the part that is doing the actual feeding and the paper enters from the front instead of the rear. There may be something broken in the front part that prevents lift.

[fixthecopier]

Re: 4700 60.02 code, need second opinion.

I may have missed something when scanning the previous posts, but you're saying the problem only occurs when printing from tray 1? Did you replace tray 2? It is the part that is doing the actual feeding and the paper enters from the front instead of the rear. There may be something broken in the front part that prevents lift.

Thanks for responding. The problem was that the metal brace behind tray 2 was bent in just enough to keep the tray from fully engaging the lift motor. I suspect someone kicked it when moving it. It was probably off by a couple of mm's.

[ARosado92]

Re: 4700 60.02 code, need second opinion.

Am in a site where they have 100 hp 4700 and this problem you had saved my life thanks