HP 4250 / HP 4345 heating element

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • veka888
    Junior Member
    • Apr 2015
    • 5
    #1

    HP 4250 / HP 4345 heating element

    Hi everyone,
    I am new here and I hope I can help someone in theards becouse my company have more than 1000 printers in lease and also hope that someone can help me with my case.

    Until now we always put new heating element when rebuildng fuser cores for 4250 4350. Dos anyone know is it right thing or wasteing of time and money?
    Does anyone tested heating element for few times cicle on this machines. Regards
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22921
      #2
      Re: HP 4250 / HP 4345 heating element

      I typically do not replace the heater assy with a fuser rebuild. I may have replaced 6 heaters in my career for cause. How do I diagnose it? Look at this document:

      I have other docs that are too large to attach. PM me an email destination if you'd like them.
      Attached Files
      Last edited by blackcat4866; 05-16-2015, 08:17 PM.
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        Previous template Next
        Working...