Kyocera TA6551ci, "close main unit cover 1"

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Thayer
    Trusted Tech

    100+ Posts
    • Dec 2017
    • 107
    #1

    [Error Code] Kyocera TA6551ci, "close main unit cover 1"

    Problem machine here...LOL. 1,960,388 total copy count
    Customer cleared jam from try 2, and then message would not away.

    24V at PWB 1

    Close main unit cover 1....we have replaced:
    PWB feed 1
    LVP
    Relay board
    Changed connector on machine side
    Engine PWB

    Any thoughts or similar issues??

    Thanks
    Tags: cover, main, pwb, unit
    • craigster
      Trusted Tech

      100+ Posts
      • Apr 2016
      • 200
      #2
      Re: Kyocera TA6551ci, "close main unit cover 1"

      Did you go to u31 and see what switch is actually causing the issue? I have seen the same problem with the cover left of slit glass cause same problem.
      Just a thought

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22698
          #3
          Re: Kyocera TA6551ci, "close main unit cover 1"

          None of the door switches appear in U031. We noticed that in addition to:

          PCUSW paper conveying unit switch (Feed PWB 1: YC15 pins 1&3, YC1 pin23, YC6 pin42)(signal: INTER_LOCK)

          also not reacting:
          PCCSW (Feed PWB 2, YC4 pin 29)(Feed PWB 2, YC1 pin 29)(Feed PWB 2, YC6 pin 4)(signal: R_COVER_SW)
          PFPCCSW paper feed conveying cover switch (PF Main PWB, YC5 pin 1&2) (signal: COVER_OPEN)
          DUCSW duplex cover switch
          first stage: (Relay PWB, YC1 pin6)(Engine PWB, YC6 pin47)(Feed PWB 1, YC14 pin13)(signal: DU_OPEN_SW)
          second stage: (Engine PWB, YC6 pin47)(Relay PWB, YC1 pin 18)(signal: DU_OPEN)

          Already changed: Engine PWB, Relay PWB, Feed PWB 1

          Some possibilities?:
          PF Main PWB 303NF94060
          Feed PWB 2 (FPWB2) 302N494170
          Ribbon Cable FFC Feed2: 302N446180
          Ribbon Cable Wire SMT Power: 303NF46060

          Our donor KM-8001i has all of these to offer.
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22698
              #4
              Re: Kyocera TA6551ci, "close main unit cover 1"

              Four hours later:
              We know that all 24v2 DC voltages are gone. 24v1 voltages are present from the PS to the PF PWB 1. It's the job of the PF PWB 1 to distribute 24v2 (and it isn't).

              Mostly out of desperation we tried PF Main PWB, PF PWB 1, PF PWB 2, all ribbon cables, and pinned out the harness and connectors from the relay PWB to the PF PWB 1.

              The most recent theory (and no more plausable than the others), is that the IH PWB is killing the 24v2. It's about the only board we haven't changed yet. There is history of not-fusing issues that would come and go.
              =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                Previous template Next
                Working...