Broken Wheel

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • yormets
    Trusted Tech

    250+ Posts
    • May 2009
    • 336
    #1

    Broken Wheel

    Please help. Where can I purchase a wheel assy for a X658. This is for the large square looking base. It is held on by four screws. Anyone know a replacement?

    Roy
    Tags: None
    • Iowatech
      Not a service manager

      2,500+ Posts
      • Dec 2009
      • 3930
      #2
      Re: Broken Wheel

      If possible, share a picture of what you are looking at please.
      You are our eyes here.

        Comment

        • subaro
          Service Manager

          1,000+ Posts
          • Oct 2010
          • 1273
          #3
          Re: Broken Wheel

          There is no part number for those. you will have to purchase the entire caster base which comes with one tray if you want the original caster wheel.
          My suggestion is to remove the machine from the tray assy, its easy with another person helping. remove one of the wheel and take it to hardware store that sells those and see if you get a match. you should be able to get it. replace in pairs, if it the front, replace both the front.
          THE ONLY THING FOR EVIL TO TRIUMPH IS FOR GOOD MEN TO DO NOTHING..........edmund burke

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22927
              #4
              Re: Broken Wheel

              Originally posted by subaro
              There is no part number for those. you will have to purchase the entire caster base which comes with one tray if you want the original caster wheel.
              My suggestion is to remove the machine from the tray assy, its easy with another person helping. remove one of the wheel and take it to hardware store that sells those and see if you get a match. you should be able to get it. replace in pairs, if it the front, replace both the front.
              I've got a few odds and ends also. Take a picture, and maybe someone will have one for you. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                Previous template Next
                Working...