prints, copies are slow when using tray #one fast out of by pass and #2 tray replaced drive unit and main pcb still slow out of # 1 tray. Thanks for replys
-
-
Re: lexmark xm-11465 slow
Check the paper type settings and compare between tray 1 and the rest. If it's set to something strange, change it to plain paper. -
Re: lexmark xm-11465 slow
Also, make sure that the paper size is set the the correct size. Is there a Lexmark model XM-11465? I don't think so. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: lexmark xm-11465 slow
sorry , XM-1145, thanks for replys i will ck settingsComment
Comment