[Jamming] Lexmark E250d

[roho]

Not a normal line of printers I work on. I have a lexmark that has had the pick up rollers changed but still has jamming issues. Seems as though the media drive assembly needs some parts replaced. I saw where some of the drive parts are available but cannot find in the service manual how to replace the media drive assembly or media clutch, which concerns me. Has anyone replaced these parts before, any advice?

Thanks in advance!!

[Phil B.]

Re: Lexmark E250d

Not a normal line of printers I work on. I have a lexmark that has had the pick up rollers changed but still has jamming issues. Seems as though the media drive assembly needs some parts replaced. I saw where some of the drive parts are available but cannot find in the service manual how to replace the media drive assembly or media clutch, which concerns me. Has anyone replaced these parts before, any advice?

Thanks in advance!!

PM me with your email

[Lance15]

Re: Lexmark E250d

Is is making a clicking noise when it tries to pull? If it is, you'll need to replace: 40X2831 - Media feed ACM clutch CBM. Have replaced it in the past. PITA, but, works.

I've seen many times (on the Dell version (1720)) where one of the pick rolls just rotates on the shaft. I've fixed this using super glue.

[roho]

Re: Lexmark E250d

PM me with your email

Have just done so
Thanks!!

[roho]

Re: Lexmark E250d

No clicking noise but I was going to rrplace that clutch as well as the drive

[Phil B.]

Re: Lexmark E250d

No clicking noise but I was going to rrplace that clutch as well as the drive

check you email

[roho]

Re: Lexmark E250d

Thanks for all the help, clutch finally came in and I replaced it yesterday. Hope I don't see that old puppy again!