[Error Code] Lexmark M5155 PrintheaD

[tech07]

OK. I've replaced a few laser printheads in this model, but today I ran into a problem..
The original error code was 111.30 ( Printhead ID )
Easily replaced it.
Now the code has changed to 111.40 ( not in the manual )
So I would consider the main board but I am undecided yet. The original code went away
but replaced by a different code, but still a print head code.
I hope I/m not missing something. I ordered the same one I always have
40X8481 (hot roll fuser type)
reseated Mirror motor and video connections but no go.
What do you think?

[Phil B.]

Re: Lexmark M5155 PrintheaD

OK. I've replaced a few laser printheads in this model, but today I ran into a problem..
The original error code was 111.30 ( Printhead ID )
Easily replaced it.
Now the code has changed to 111.40 ( not in the manual )
So I would consider the main board but I am undecided yet. The original code went away
but replaced by a different code, but still a print head code.
I hope I/m not missing something. I ordered the same one I always have
40X8481 (hot roll fuser type)
reseated Mirror motor and video connections but no go.
What do you think?

I think you should double check your repair.

Sent from my SM-G960U using Tapatalk

[tech07]

Re: Lexmark M5155 PrintheaD

Not very helpful Phil..
Double checked my repair already, twice.
Any serious input

[tech07]

Re: Lexmark M5155 PrintheaD

Good, bad or indifferent, I always like to post any solutions to problems I encounter.
In this particular case, the new printhead I recieved from Lexmark was defective.
They shipped me another one and the problem is solved. (thanks Phil)