xerox d110 manuel

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Apouthe Donald
    Technician
    • Mar 2014
    • 82
    #1

    xerox d110 manuel

    hello i have a xerox d110 which displays 042-312.
    -I need your help and also need documentation.
    here are the different works to realize
    1-I replaced the AC ventilator
    2-I replaced the engine Drum
    3-I replaced fuser exhaust fan / fan transfer and fan intake fan.
    after all this the code 042-312 is still present. thank you and need your helpers
    Tags: 042-312, d110, fan, replaced, xerox
    • adriansto
      Service Manager

      Site Contributor
      VIP Subscriber
      1,000+ Posts
      • Nov 2007
      • 2329
      #2
      Re: xerox d110 manuel

      Originally posted by Apouthe Donald
      hello i have a xerox d110 which displays 042-312.
      -I need your help and also need documentation.
      here are the different works to realize
      1-I replaced the AC ventilator
      2-I replaced the engine Drum
      3-I replaced fuser exhaust fan / fan transfer and fan intake fan.
      after all this the code 042-312 is still present. thank you and need your helpers
      I have it in edoc and pdf format.
      My mail = stoadis@gmail.com

        Comment

        • gpoffmachs
          techie

          50+ Posts
          • Feb 2005
          • 55
          #3
          Re: xerox d110 manuel

          BSD 9.13 (D95/D110/D125 Only), BSD 9.13A (D136 Only)

          [IMG]pws://file/xerox/edoc/95-110-125/icons/arrwup.gif[/IMG]Description

          [IMG]pws://file/xerox/edoc/95-110-125/icons/arrwup.gif[/IMG] Procedure

          [IMG]pws://file/xerox/edoc/95-110-125/icons/caution.gif[/IMG]CAUTIONThe Accessories have their own power cord. Whenever a procedure states to Power Off and then Power On, POPO, etc., powering Off and then powering On the IOT does NOT Power Off the Accessories. The Accessories will have to be Powered Off and then On separately from the IOT by unplugging the Accessory power cord.

          Check the following:
          Techie

            Comment

            • Apouthe Donald
              Technician
              • Mar 2014
              • 82
              #4
              Re: xerox d110 manuel

              Thank you very much for the help, the machine works well. I would like to know:
              1-you are in which country?
              2-are you selling xerox equipment
              here is my email: fredonaldy@gmail.com and my whatssap number 0022558549509

                Comment

                • adriansto
                  Service Manager

                  Site Contributor
                  VIP Subscriber
                  1,000+ Posts
                  • Nov 2007
                  • 2329
                  #5
                  Re: xerox d110 manuel

                  Check fuse F11 on IOT pwb

                    Comment

                    • VINCENT23OMAN
                      Technician
                      • May 2021
                      • 14
                      #6
                      Re: xerox d110 manuel

                      Originally posted by gpoffmachs
                      BSD 9.13 (D95/D110/D125 Only), BSD 9.13A (D136 Only)

                      [IMG]pws://file/xerox/edoc/95-110-125/icons/arrwup.gif[/IMG]Description[IMG]pws://file/xerox/edoc/95-110-125/icons/arrwup.gif[/IMG] Procedure

                      [IMG]pws://file/xerox/edoc/95-110-125/icons/caution.gif[/IMG]CAUTIONThe Accessories have their own power cord. Whenever a procedure states to Power Off and then Power On, POPO, etc., powering Off and then powering On the IOT does NOT Power Off the Accessories. The Accessories will have to be Powered Off and then On separately from the IOT by unplugging the Accessory power cord.

                      Check the following:
                      hello and good day, im having the same issue in my Xerox D125 error code 042-312, I check the back of the machine and all the harness but there is no tagging or marking on the harness. I couldnt locate where is the wire harness BSD9.13

                        Comment

                        • adriansto
                          Service Manager

                          Site Contributor
                          VIP Subscriber
                          1,000+ Posts
                          • Nov 2007
                          • 2329
                          #7
                          Re: xerox d110 manuel

                          Originally posted by VINCENT23OMAN
                          hello and good day, im having the same issue in my Xerox D125 error code 042-312, I check the back of the machine and all the harness but there is no tagging or marking on the harness. I couldnt locate where is the wire harness BSD9.13
                          BSD 9.13 is the schematics I posted in #11 on your open thread. On this schematics you see the connectors numbers and wires. If you cant manage to use this then place a call to xerox tech.

                            Comment

                            • VINCENT23OMAN
                              Technician
                              • May 2021
                              • 14
                              #8
                              Re: xerox d110 manuel

                              Originally posted by adriansto
                              BSD 9.13 is the schematics I posted in #11 on your open thread. On this schematics you see the connectors numbers and wires. If you cant manage to use this then place a call to xerox tech.
                              found the harness and tried to disconnect it from the board and recon and tried to on the machine. Still error is there. Maybe the board is defective

                                Comment

                                Previous template Next
                                Working...