Im looking for some thick mylar adhesive backed stock. Anyone have a suggestion on where to purchase this. We used to cut up a Sharp mylar but cant seem to find the part number. Thanks in advance!
-
-
Re: Mylar stock
The ones that I keep in stock are a Konica Minolta part number:
20AK 4612 0 Conveyance Guide Sheet
They're about 12" x 1 1/4" with a self adhesive strip ~1/4" wide. I've cut them up for DF's, finisher guides, copier guides, ... pretty much anywhere a LTR page has to travel. They do not withstand fuser heat, not for lack of trying.
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: Mylar stock
I have cut a transparency and used double sided tape with success more than once.Comment
-
Re: Mylar stock
The problem wit that is it's not thick enough.Comment
-
Re: Mylar stock
I'm looking for something that if if I have make a sensor arm mount on a rib for a day or two it stays!Comment
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: Mylar stock
Have you tried look at a local hobby and arts supply store?Comment
-
Re: Mylar stock
Avery makes 3mil sheets. Avery 73601: Clear Self-Adhesive Laminating Sheets | OfficeWorld.com
Magicard makes 14mil cards. https://www.idwholesaler.com/M3610-054B.htmlComment
Comment