If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
the quick way, open the door on finisher, then there's a hole around the middle near the bottom, screwdriver or other object in there , you should be able to slide finisher towards front of m/c, correct way, open door, remove panel hiding connectors, unplug all connectors, then remove either 4 or 6 screws holding the tray unit on, lift off tray section, then as above....
Tip for the day; Treat every problem as your dog would.....If you cant eat it or f*ck it....then p*ss on it & walk away...
Comment