How to reset fuser error on Konica Bizhub C253

[syam201]

Dear Friends Pls let me know how can we reset the fuser error on Konica Bizhub C253

[habik]

Re: How to reset fuser error on Konica Bizhub C253

Dear Friends Pls let me know how can we reset the fuser error on Konica Bizhub C253

What code do you get? That narrows the fault finding to usually specific part.

Take fuser out and measure resistance on the lamp, thermistor, thermal protection. If all looks OK, then try trouble reset (look on other threads, you'll find procedure how to), if that doesn't work, then check the voltages on power supply. Other than that, you better of with new machine then replacing boards.

[Synthohol]

Re: How to reset fuser error on Konica Bizhub C253

system 1, initialization, system error clear, roboot.
if the code comes back replace the fuser

[Callboy6]

Re: How to reset fuser error on Konica Bizhub C253

Hello,

1. Turn OFF the main power switch.
2. Turn main power switch ON while pressing the Utility/Counter key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly.