7 Series Paper Tray Size Recognition Issues

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • CraigW
    Trusted Tech

    Site Contributor
    250+ Posts
    • Dec 2010
    • 417
    #1

    7 Series Paper Tray Size Recognition Issues

    Anyone else seeing paper size detection problems on color & mono 7 series machines.

    In the cassettes. 1 had letter loaded and said 5.5 x 8.5 the other was 11 X 17 and had ?? marks displayed.

    Also had problems with the mono 7s cassettes as well.

    Found a few solutions but not much info as of yet.

    Thank You !
    Tags: None
    • copyrooks
      Trusted Tech

      Site Contributor
      100+ Posts
      • Oct 2013
      • 201
      #2
      Re: 7 Series Paper Tray Size Recognition Issues

      I have run into this issue on many bizhub 227s and c227s. Usually the 2 screws on the tray need to be adjusted and it works after. I read a bulletin about an issue at the factory where they werent set correctly. I havent seen the issue comeback once adjusted. Hope this helps

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22619
          #3
          Re: 7 Series Paper Tray Size Recognition Issues

          Originally posted by copyrooks
          I have run into this issue on many bizhub 227s and c227s. Usually the 2 screws on the tray need to be adjusted and it works after. I read a bulletin about an issue at the factory where they werent set correctly. I havent seen the issue comeback once adjusted. Hope this helps
          I'm interested. Which two screws? Pictures please? =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • copyrooks
              Trusted Tech

              Site Contributor
              100+ Posts
              • Oct 2013
              • 201
              #4
              Re: 7 Series Paper Tray Size Recognition Issues

              I attached the pdf for it
              Attached Files

                Comment

                • CraigW
                  Trusted Tech

                  Site Contributor
                  250+ Posts
                  • Dec 2010
                  • 417
                  #5
                  Re: 7 Series Paper Tray Size Recognition Issues

                  A few have worked after centering the screws.....some have not.


                  Those star washers remind me of fixes I used on 7020 series cassettes.

                    Comment

                    • tech51
                      Senior Tech

                      500+ Posts
                      • Jan 2009
                      • 840
                      #6
                      Re: 7 Series Paper Tray Size Recognition Issues

                      Also the wiring to the sliding block on the rear can break causing size errors.

                        Comment

                        Previous template Next
                        Working...