How to put a user code for copying and for printing in this machine?
biz 250
Collapse
X
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: biz 250
I selected the following
1)utility, details, code12345678, Administrator Management 1 screen, and then touch [Account/
User Auth.].,Touch [User Authentication ON/OFF]., user auth setting ->on, account truck->on, sychronize ->on, enter, yes, enter
then i
1 Display the Administrator Management 1 screen, and then touch [Account/
User Auth
2 Touch [Account Track
Setting].
3 Touch the button for the
range of accounts that
includes the desired account.
4 Select an account
number
5.Display the Account Data screen, and then select an available account
number.
6. Touch [Account Name) I gave 187 for name
7. Touch [Password for pas i gave 33333333
8. touch new password
9. Retype password
10.Touch [Max. Print Limit]. i left as it was
11. enter enter etc
Whan i open machine it asks for user name i give 187 , then ask for password i givw 33333333 but it doesn't allow me to get in machines menu for copy.
What did i do wrong?Comment
-
Re: biz 250
Sounds right to me. Are you limiting any of the functions? When you go back into Account Track Mode, is the new account you created there? Try creating another new account. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment