PDA

View Full Version : BizHub C650 "K" IU lock plate


Custom Search


copyman
07-08-2017, 03:30 PM
Does anyone have one of those lock plates to sell. This is the small metal piece that holds the black IU in tight so it won't dump developer. Part # A00JP33100

Thanks

femaster
07-08-2017, 08:22 PM
Does anyone have one of those lock plates to sell. This is the small metal piece that holds the black IU in tight so it won't dump developer. Part # A00JP33100

Thanks

If you use the IU beyond it's recommended life, it will dump anyway, even with the bracket. If nobody comes up with a part for you, you could always make a bracket by bending one end of one of these:
https://www.walmart.com/ip/7pcs-Furniture-Fixing-Hardware-Corner-Brace-Angle-Brackets-40mmx40mmx17mm/110042454
(https://www.walmart.com/ip/7pcs-Furniture-Fixing-Hardware-Corner-Brace-Angle-Brackets-40mmx40mmx17mm/110042454)

copyman
07-08-2017, 11:33 PM
yea I was thinking about making the bracket but figured I would ask here first.

I know about the C650, C451 & C550 dumping, has anyone here rebuilt the Black IU? I see there is a kit with aftermarket drum, blade & developer. I was going to use this machine in my office because I have a bunch of supplies for it. Don't want to spend a lot of money on this old beast. If it gets to that point off to the scrap yard.....

Thanks

Custom Search