Developing Unit-K BH-C-280 not compatible with Olivetti MF-220?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Hansoon
    Field Supervisor

    Site Contributor
    2,500+ Posts
    • Sep 2007
    • 3252
    #1

    Developing Unit-K BH-C-280 not compatible with Olivetti MF-220?

    Developing Unit-K BH-C-280 not compatible with Olivetti MF-220?

    Customer used after market K toner in his Olivetti MF-220 (rebranded KonicaMinolta BH-C-220) resulting in offsetting of the fuser unit. Offsetting happened only with K, colors CYM all perfect so the fuser unit does not seem the culprit but obviously the after market K toner.

    To help the customer out I brought a K-developing unit from one of our BH-C-280 (should be identical with BH-C-220) with me. To my surprise it didn't fit into the Olivetti. The pin which is beside the lower screw seems thicker than the the size of the hole in the BH-C-280 developing unit. Please, can you guys confirm that the K-developing units are not interchangeable, or did I overlooked something?

    Hans
    Last edited by Hansoon; 06-09-2018, 06:24 AM.
    " Sent from my Intel 80286 using MS-DOS 2.0 "
    Tags: bh-c-280, developing, mf-220, olivetti, unit
    • Hansoon
      Field Supervisor

      Site Contributor
      2,500+ Posts
      • Sep 2007
      • 3252
      #2
      Re: Developing Unit-K BH-C-280 not compatible with Olivetti MF-220?

      *COUGH*

      Hans
      " Sent from my Intel 80286 using MS-DOS 2.0 "

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22619
          #3
          Re: Developing Unit-K BH-C-280 not compatible with Olivetti MF-220?

          I don't have any answers for you Hans, but I can be fairly certain that the EEPROM is specific to the manufacturer. So even if it fits mechanically, it probably won't recognize it as a new unit. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • allan
              RTFM!!

              5,000+ Posts
              • Apr 2010
              • 5435
              #4
              Re: Developing Unit-K BH-C-280 not compatible with Olivetti MF-220?

              Try changing the plastic rail(cover) at the bottom of the dev unit.
              Would have guess that there is no difference...
              There is no fancy electronics on the dev chip its a TCR sensor and an ICP.
              Whatever

                Comment

                • copyman
                  Owner / Technician

                  Site Contributor
                  2,500+ Posts
                  • Sep 2005
                  • 4095
                  #5
                  Re: Developing Unit-K BH-C-280 not compatible with Olivetti MF-220?

                  Sorry Hans I don't have an answer either but this would be the first time I heard of a cross branded machine that couldn't "fit" the OEM (Konica Minolta) consumables. From my experience they would always fit but would have to change chip, etc.
                  I'm curious to find out even though I'm not sure cross branded machines are even being sold in the USA anymore? Last K/M cross I seen was an NEC cross to a C253.

                    Comment

                    Previous template Next
                    Working...