BIZHUB 1050

[fernan]

hello guys,,,
Can anyone help on Konicaminolta BH 1050 frequent jamming when paper is coming out FACE DOWN but no jamming occur DOUBLE SIDED COPY and COPY FACE UP,
i use to set the machine on double sided as a default,
any one has an idea about it ?

[pepper38_cnd]

Did this start after a PM? If so check decurling roller bearings. I made the mistake on my first PM of throwing out one of the bearings on the decurling roller it came out with the roller and i didn't realize there was more than 1 bearing on each end. It caused the symptom you are describing. I learned from my mistake.

[fernan]

thanks a lot.......

[Rolandito]

maybe u must clean photo sensors, where the sheets is turn over unit,

[fernan]

i finally solved the problem THANKS