Konica Minolta C458 Humming/Whistle Noise

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mearmi
    Trusted Tech

    Site Contributor
    250+ Posts
    • Oct 2010
    • 346

    #1

    [Misc] Konica Minolta C458 Humming/Whistle Noise

    in Konica Minolta C458 getting continuous Humming/Whistle Noise.

    Even the front and side doors are open and machine is not functioning. Is it from power supply? or another card.

    Kindly advise.

    Thanks and kind regards,

    mearmi
  • copyman
    Owner / Technician

    Site Contributor
    2,500+ Posts
    • Sep 2005
    • 4537

    #2
    Re: Konica Minolta C458 Humming/Whistle Noise

    Originally posted by mearmi
    in Konica Minolta C458 getting continuous Humming/Whistle Noise.

    Even the front and side doors are open and machine is not functioning. Is it from power supply? or another card.

    Kindly advise.

    Thanks and kind regards,

    mearmi
    Not much is on and little output from power supply with doors open. If happening when doors open then I would look at a fan making noise.

    Comment

    • Oystercopy
      Senior Tech

      Site Contributor
      500+ Posts
      • Oct 2009
      • 618

      #3
      Re: Konica Minolta C458 Humming/Whistle Noise

      I'm with the previous answer, I've had to replace several fans for noise, down by the power supply. Reasonably easy to get to.
      OC

      Comment

      • tsbservice
        Field tech

        Site Contributor
        5,000+ Posts
        • May 2007
        • 7922

        #4
        Re: Konica Minolta C458 Humming/Whistle Noise

        My vote goes to PS.
        See this thread Bizhub C308 Power Supply Humming Noise - Fuser
        Last poster has some interesting ideas
        A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
        Blessed are they who can laugh at themselves, for they shall never cease to be amused.

        Comment

        • tmmdmmm
          Trusted Tech

          Site Contributor
          100+ Posts
          • Apr 2021
          • 173

          #5
          Re: Konica Minolta C458 Humming/Whistle Noise

          Is it similar to a coil whine? 454s had this issue, a board on the upper rear of the machine. I suspect because they were initially designed for 20a but then dropped to 15a, as it only affected the 454s but never fully looked into it. Might be the same for the 458.

          Comment

          Working...