My machine konica 226 Lower print issues

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zawmyo201210
    Technician

    50+ Posts
    • Oct 2022
    • 51
    #1

    [Misc] My machine konica 226 Lower print issues

    My printer Konica 226 is producing poor quality images, so I have ordered a new Developer powder(DV116) and a new drum.
    In the same way, the quality is not as good as before. Bad type of pounder powder? I want to know.
    The laser units have been thoroughly cleaned. Please advise me.

    developer
    Tags: bad, good, konica, powder, quality
    • Toxic
      Senior Tech

      500+ Posts
      • Dec 2009
      • 694
      #2
      Re: My machine konica 226 Lower print issues

      Check transfer roller if it sits ok and is contact ok.
      If copy quality was the same (bad) just after replacing parts then toner,drum and developer is not a problem.
      Also check is fuser roller lever is in the pressed position.

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22942
          #3
          Re: My machine konica 226 Lower print issues

          I think it would help to post some image quality samples and the yield on the machine consumables. I'm not totally averse to guessing, I need something to base opinions on. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • zawmyo201210
              Technician

              50+ Posts
              • Oct 2022
              • 51
              #4
              Re: My machine konica 226 Lower print issues

              Originally posted by blackcat4866
              I think it would help to post some image quality samples and the yield on the machine consumables. I'm not totally averse to guessing, I need something to base opinions on. =^..^=

              I understand what you are saying. The current bug has also been uploaded with a file.

              I have always corrected this kind of incident. Some of the things that don't look like a picture will be okay if you just change the powder once.

              For some, if it is not convenient to add a packet of pounder powder, throw it away and add a new packet.

              Now that I have the copy machine, I think it will be fine to put in another new bag of powder. Because it is convenient to add the entire drum unit from another machine.

              Can you tell me why some pounder powders are good to be added twice? I have a lot of losses.

              Please

                Comment

                • Toxic
                  Senior Tech

                  500+ Posts
                  • Dec 2009
                  • 694
                  #5
                  Re: My machine konica 226 Lower print issues

                  I dont understand what are you trying to say.
                  Did you empty old developer from developing unit and put whole new packet of developer or you just add some new developer to existing old developer?
                  Did you run tcr adjustment after developer replace?
                  If you have complete imaging unit from another working 226 you can put in and check if that solve problem.
                  Maybe it will be smartest idea to find some technician to solve that, it will save you money because 226 is basic model and problem finding is not complicated for moderately good technician.

                    Comment

                    Previous template Next
                    Working...