Hello i need help pls..

[tarzak911]

KONICA MINOLTA BIZHUB B250/350 / 200

I HAVE AN ABORT CODE 0000999a i cannot fix.. problem seem to appear when printing on the net work. any suggestions pls.

[DadO]

Try whit a new firmware. I only had abort code when my PWB-M was faulty.

[tarzak911]

Try whit a new firmware. I only had abort code when my PWB-M was faulty.

thnk u tried and did not work problem was faulty ip adress.trust me sounds not real but it was.

[elton]

i have the same code i have replaced all tthe boards and scanner motor , u say it was the ip adress how can that be my machine has no network card in it

[copytechman]

If its a bizhub 200/250/350 mono machine anything like all of the ones I have it indeed has a network connection, built into upper right hand side of scanner unit basically!
A.

[ciuffe]

The new firmware solves the problem.

The following bugs are fixed:
Print from a CAD software, the machine hangs up and does not print anything
Abort 0x0000999a when printing specific PDF file via PS driver
Fax country does not set
Try

[Deas]

What "new firmwarw" are we talking about? I have G30-80 but still get the 0x0000999a abort code?!

(Bizhub 250)

[moonwalker3778]

crosscheck MFBS board.