View Full Version : Resetting Konica 7045 to factory default

Custom Search

11-18-2009, 09:18 AM

Does anybody here have the reset memory to factory defaults code/instruction for Konica 7045?

Found instruction below for Konica 7020, wonder if its the same for Konica 7045.



11-18-2009, 11:54 AM
i think it is the same

[2] Initial Setting in the field
Each adjustment data is totally returned to the data value when
the machine is delivered from the factory.
Step Operation procedure
1 Enter the 47 mode.
2 [47 mode menu screen]
Press 93 by means of the copy quantity setting
Check that 093-00 appears in the message display
3 Press the Start print button. (*1)
The message display column [NOW] display changes
to [FIN] and resets and ends.
4 To end the setting, press the Stop/Clear button.
5 To end the 47 mode, turn off the SW2 (sub power).
*1: It may be necessary to change the language in both 25
mode and key operator mode after performing the initial

11-18-2009, 05:27 PM
How to reset the machine (initialize memory) to factory defaults.


To reset memory to factory defaults perform the following:
1. Enter the 25 mode (power the machine ON, while pressing the 2 and 5 keys).
2. Select Software SW.
3. Using the up/down arrows, scroll to address 3-4 (All Memory Reset).
4. Select OFF.
5. Power the machine OFF.
6. Enter the 47 mode (turn the machine ON, while pressing the 4 and 7 keys).
7. Enter 0, 9, 3, and press the START key.
8. Power the machine OFF/ON.

Custom Search