bizhub C351 and C350 Fuser?

[mrfuser]

Does anyone know if a C350 fuser will work in a C351?

Thanks

Kelly

[brent]

Re: bizhub C351 and C350 Fuser?

I don't have my parts book handy. but I think so. pretty sure.

[minimerlin]

Re: bizhub C351 and C350 Fuser?

Spooky! We looked at both of these fusers today to see what the difference is between them..apart from the part number that is..and could not find any! Not tried in each others machines as they were in the shop for warranty claims! As far as I could see they should work!

[brent]

Re: bizhub C351 and C350 Fuser?

c350 pn 4049 513
c351 pn 4049 523

I don't know if this is one of those deals like the web supply roller on a ep 6001 and a di 470
same damn web assy. but one had a little more matieral to make a pm go 400k rather then 200 k
I would hate to say yes it will work. then you pop an ic off the pwb a. I just don't know

with my luck... it would not work

brent

[Spratt]

Re: bizhub C351 and C350 Fuser?

If i'm thinking of the right models I think the only difference is a round metal cover on the fuser where the locating pin goes. Peel that away and your fuser will fit.

[ck1]

Re: bizhub C351 and C350 Fuser?

you can put C450 fusing to C350 work nice ( i do it ) , but for c350 to C351 unknow ...

[ineo+6501]

Re: bizhub C351 and C350 Fuser?

Spratt is correct. Remove the silver metal disc shaped cover from the fuser unit. This is the only difference between C350 & C351/C450 fuser units.

[Ianizer]

Re: bizhub C351 and C350 Fuser?

Spratt is correct. Remove the silver metal disc shaped cover from the fuser unit. This is the only difference between C350 & C351/C450 fuser units.

Stole my thunder, Ineo.
Isn't K-M cute?
-I