Hello at all,
A bizhub 25e showes stripes. But only when scanning (local copy over scanning glass or scan to PC, not by copying over the normal original glass-plate).
When printing, this symptom does not occur. This error also occurs only rarely but repeatedly. The Helpdesk-Hotline (only for technicians) from Konica Minolta Europe knows no solution, except that I should replace the CB-board.
Any ideas?
bizhub 25e.jpg
A bizhub 25e showes stripes. But only when scanning (local copy over scanning glass or scan to PC, not by copying over the normal original glass-plate).
When printing, this symptom does not occur. This error also occurs only rarely but repeatedly. The Helpdesk-Hotline (only for technicians) from Konica Minolta Europe knows no solution, except that I should replace the CB-board.
Any ideas?
bizhub 25e.jpg