Bizihub C200

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • andy227
    Trusted Tech

    100+ Posts
    • Jan 2013
    • 219
    #1

    Bizihub C200

    Hi guys. Some colleagues with a KM Bizhub C200 are getting these multiple evenly spaced lines when only when photocopying color, not when printing from computer or memory. They've changed the entire scanner unit and its still the same. Anyone come across this, and any ideas ? Sample attached (I hope),


    Tags: None
    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838
      #2
      Re: Bizihub C200

      This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


      http://www.justmanuals.com



      paul@justmanuals.com

        Comment

        • blaze2000
          Trusted Tech

          Site Contributor
          100+ Posts
          • Sep 2010
          • 232
          #3
          Re: Bizihub C200

          Not sure what is exactly meant by changing the entire scanning unit. I'm assuming that would include the CCD and whole nine up top. I'm thinkin a bad connection or bad board... this attached page might give some help or guidance.
          Attached Files

            Comment

            • andy227
              Trusted Tech

              100+ Posts
              • Jan 2013
              • 219
              #4
              Re: Bizihub C200

              I'm assuming that would include the CCD and whole nine up top
              yes, the whole thing. Not sure whats going on here, but yours, and other attachments are not opening lately. Is it just me with this problem ?

                Comment

                • RRodgers
                  Service Manager

                  1,000+ Posts
                  • Jun 2009
                  • 1947
                  #5
                  Re: Bizihub C200

                  I don't remember if the connection for the main body is the male end or female end for the scanner. Maybe check for bent pin's but that will usually give you a background of one color. Try swapping ram with another machine.
                  Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22941
                      #6
                      Re: Bizihub C200

                      It looks like the lines of shame. =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        • RRodgers
                          Service Manager

                          1,000+ Posts
                          • Jun 2009
                          • 1947
                          #7
                          Re: Bizihub C200

                          Originally posted by blackcat4866
                          It looks like the lines of shame. =^..^=
                          I miss the Like button.
                          Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                            Comment

                            • andy227
                              Trusted Tech

                              100+ Posts
                              • Jan 2013
                              • 219
                              #8
                              Re: Bizihub C200

                              It looks like the lines of shame. =^..^=
                              Please elaborate...............?
                              Last edited by andy227; 11-19-2013, 05:37 PM.

                                Comment

                                • blackcat4866
                                  Master Of The Obvious

                                  Site Contributor
                                  10,000+ Posts
                                  • Jul 2007
                                  • 22941
                                  #9
                                  Re: Bizihub C200

                                  The "Lines Of Shame" are what you get when you do not do a complete setup on a Konica Minolta color MFP.

                                  Some people think: "I can just skip a bunch of those steps .. they're not really necessary." If you skip some of the steps in calibrating, the machine will print lines at ~10mm intervals in the feed direction. It's Konica Minolta's way of saying: Dumbass! Do it right!

                                  The cure is to find yourself a setup checklist. Start at the point where you plug in the machine. Do all the steps from there on.

                                  The lines are usually magenta or cyan, but I understand that they can also be yellow or black.
                                  If you'd like a serious answer to your request:
                                  1) demonstrate that you've read the manual
                                  2) demonstrate that you made some attempt to fix it.
                                  3) if you're going to ask about jams include the jam code.
                                  4) if you're going to ask about an error code include the error code.
                                  5) You are the person onsite. Only you can make observations.

                                  blackcat: Master Of The Obvious =^..^=

                                    Comment

                                    • RRodgers
                                      Service Manager

                                      1,000+ Posts
                                      • Jun 2009
                                      • 1947
                                      #10
                                      Re: Bizihub C200

                                      Originally posted by blackcat4866
                                      The "Lines Of Shame" are what you get when you do not do a complete setup on a Konica Minolta color MFP.

                                      Some people think: "I can just skip a bunch of those steps .. they're not really necessary." If you skip some of the steps in calibrating, the machine will print lines at ~10mm intervals in the feed direction. It's Konica Minolta's way of saying: Dumbass! Do it right!

                                      The cure is to find yourself a setup checklist. Start at the point where you plug in the machine. Do all the steps from there on.

                                      The lines are usually magenta or cyan, but I understand that they can also be yellow or black.
                                      Guess I've always set mine up correctly and have never seen um!! ha ha!
                                      Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                                        Comment

                                        • blackcat4866
                                          Master Of The Obvious

                                          Site Contributor
                                          10,000+ Posts
                                          • Jul 2007
                                          • 22941
                                          #11
                                          Re: Bizihub C200

                                          I've seen them exactly twice. Each time I was working in the office, with the usual hundreds of interruptions, so I had no real idea what had been done and what hadn't.

                                          When I was in class all the machines were making the lines upon arrival. I had the pleasure of fixing a bunch of things on our classroom machine. =^..^=
                                          If you'd like a serious answer to your request:
                                          1) demonstrate that you've read the manual
                                          2) demonstrate that you made some attempt to fix it.
                                          3) if you're going to ask about jams include the jam code.
                                          4) if you're going to ask about an error code include the error code.
                                          5) You are the person onsite. Only you can make observations.

                                          blackcat: Master Of The Obvious =^..^=

                                            Comment

                                            • mik77
                                              Technician
                                              • Sep 2013
                                              • 37
                                              #12
                                              Re: Bizihub C200

                                              ciao
                                              prova a fare l'stallazione iniziale della macchina. come se fosse nuova.
                                              segui il manuale alla lettera

                                              hello
                                              try to do the initial installation of the machine. as if it were new.
                                              follow the manual to the letter

                                                Comment

                                                Previous template Next
                                                Working...