Bizhub 25E constant adf jam at power on/new install

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • axdexter
    • Jul 2025

    #1

    [Jamming] Bizhub 25E constant adf jam at power on/new install

    Hello. I am am having trouble with a Bizhub 25E, that has a adf jam that wont clear. I check both ds2, and ds3 and neither one of
    them change states. The are both reflective optical sensors, check connections and re-seated everything. All others sensors check out fine.
    If I unplug the feeder it power ups normally. It got un-boxed with this problem. Has anyone had any problems with this rebadged muratec?

    Thanks for any help


  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 23006

    #2
    Re: Bizhub 25E constant adf jam at power on/new install

    I think I'd pin-out the cable from the machine to the DF. At least make sure that you're getting all your voltages. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • wseyller
      Service Manager

      1,000+ Posts
      • Sep 2012
      • 1129

      #3
      Some of these sensors you can look at them thru a smart phone camera viewer and you will see a light shine from them if they are powered on.

      Sent from my DROID BIONIC using Tapatalk

      Comment

      Working...