fk 502 fax installation question

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • brent
    Service Manager

    Site Contributor
    1,000+ Posts
    • Nov 2008
    • 1208
    #1

    fk 502 fax installation question

    I am putting a fk 502 kit into an existing machine in the field. problem is. I wanted to get an installation manual
    on my konica minolta it shows this kit with the mk 720 but its for a c652 c452 is this close to the same instructions?
    I would hate to get into it and have this not be the right manual. thoughts?

    brent
    Tags: None
    • emujo
      Field Supervisor

      2,500+ Posts
      • Jun 2009
      • 3009
      #2
      Re: fk 502 fax installation question

      The instructions are similar to the C650, MK720 goes in, FK 502 slides in from the side, but it goes in the opposite slot the 650 calls for. Then, service mode to install the fax, initialize it, and test. You may want to have the latest firmware version for the C652 if the fax was ever installed in a different MFP. Emujo

      After re-reading your post, I'm not sure what model of MFP you are putting the FK-502 in. I is used in several models, the mount kit is different from family to family though.
      If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

        Comment

        • brent
          Service Manager

          Site Contributor
          1,000+ Posts
          • Nov 2008
          • 1208
          #3
          Re: fk 502 fax installation question

          I am installing it into a bizhub c360

            Comment

            • emujo
              Field Supervisor

              2,500+ Posts
              • Jun 2009
              • 3009
              #4
              Re: fk 502 fax installation question

              C280 uses the MK720/Fk502..You should be fine, but have the firmware handy anyway.. Emujo
              If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22941
                  #5
                  Re: fk 502 fax installation question

                  I'll see if I can scan those installation instructions tomorrow AM. =^..^=

                  Edit: I found a PDF.
                  Attached Files
                  Last edited by blackcat4866; 07-10-2014, 01:17 AM.
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    • brent
                      Service Manager

                      Site Contributor
                      1,000+ Posts
                      • Nov 2008
                      • 1208
                      #6
                      Re: fk 502 fax installation question

                      thanks so much black cat. I j ust noticed your post with the instructions. I had the ones for the higher speed machine. this exactly what I needed
                      you are too good to me


                      brent

                        Comment

                        • blackcat4866
                          Master Of The Obvious

                          Site Contributor
                          10,000+ Posts
                          • Jul 2007
                          • 22941
                          #7
                          Re: fk 502 fax installation question

                          I'm glad to help. =^..^=
                          If you'd like a serious answer to your request:
                          1) demonstrate that you've read the manual
                          2) demonstrate that you made some attempt to fix it.
                          3) if you're going to ask about jams include the jam code.
                          4) if you're going to ask about an error code include the error code.
                          5) You are the person onsite. Only you can make observations.

                          blackcat: Master Of The Obvious =^..^=

                            Comment

                            Previous template Next
                            Working...