If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
What did you check? All new toners? Check the metal contacts at the end of the cartridge slots, if they are bent or out of place.
Thanks for your reply. all new toners. the only thing that i already made is update the firmware and clear r-con. i will test your sugestion of bend cartridge slots.
Thanks for your reply. all new toners. the only thing that i already made is update the firmware and clear r-con. i will test your sugestion of bend cartridge slots.
already test the blend cartridges slots and all ok
Comment