Results 1 to 4 of 4
  1. #1
    MFP Tech & I.T. Manager 100+ Posts MFPs R Now PCs's Avatar
    Join Date
    Jul 2011
    Posts
    156
    Rep Power
    27

    Angry Question at End of Every Operation

    We have a bizhub C552DS that is asking with a Yellow Triangle Exclamation Mark on a White Background "Do you wish to continue to use the destination and Job settings?" after EVERY Copy, Scan and Fax job initiated. I have never seen this before. I have looked at different settings under User and Administrator as well as reset to Factory Default the Default Copy Settings and Default Scan/Fax Settings under User Settings. I have even reset Network Setting Data, Copy Program Data and Address Registration Data in tech mode under System 1/Initialization. Where do I turn this off? Thanks in advance!
    It does not matter how slowly you go as long as you do not stop. –Confucius

  2. #2
    Field Supervisor 500+ Posts B0265's Avatar
    Join Date
    Jan 2007
    Posts
    714
    Rep Power
    47

    Re: Question at End of Every Operation

    Check this setting:
    [Utility] - [Administrator Settings] - [System Settings] - [Reset Settings] - [Job Reset] - [Next Job]

  3. #3
    Master Of The Obvious 10,000+ Posts
    Question at End of Every Operation

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,471
    Rep Power
    463

    Re: Question at End of Every Operation

    Many Kyocera's do this: Are you sure? Are you sure? Are you sure?

    YES! I'M SURE! =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    MFP Tech & I.T. Manager 100+ Posts MFPs R Now PCs's Avatar
    Join Date
    Jul 2011
    Posts
    156
    Rep Power
    27

    Re: Question at End of Every Operation

    Quote Originally Posted by B0265 View Post
    Check this setting:
    [Utility] - [Administrator Settings] - [System Settings] - [Reset Settings] - [Job Reset] - [Next Job]
    That was it! I thank you for your time and advice, it is much appreciated.
    It does not matter how slowly you go as long as you do not stop. –Confucius

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here