Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Senior Tech 100+ Posts CopierNerd's Avatar
    Join Date
    Feb 2015
    Posts
    141
    Rep Power
    11

    Re: bizhub 458e fusing Unit error code c-3726

    Quote Originally Posted by allan View Post
    NTC = termistor. Negative Temperature Coefficient. Polymer device that lowers resistance if heated up.

    So if you move this fuser to a known good machine do you get the same result?

    You can do warranty claim on this kind of failure if you can prove its the fuser.
    I have checked it on other machine. Fusing unit gives same error code which means problem is with the NTCs. Warranty can be claimed but I want to know the reason why this is happening with 8e series? Are these new 8 models are crap due to this fusing unit trouble? Or there is some kind of environmental issue?

  2. #12
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    3,634
    Rep Power
    72

    Re: bizhub 458e fusing Unit error code c-3726

    Have not experienced this myself.
    Check the lamp resistance and the NTC resistance and see if there is a difference there compared to a good one.

    If the sensors are set to close this could be an issue or if they are to far it could cause the thermal fuse to go.
    Not sure if these have IR radiation detection like some production machines.
    Whatever

  3. #13
    Master Of The Obvious 10,000+ Posts
    bizhub 458e fusing Unit error code c-3726

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    17,898
    Rep Power
    303

    Re: bizhub 458e fusing Unit error code c-3726

    Mine was a C3826 (C368), but I only had a peripheral role. The machine was down and I got handed the fuser to install. This machine had two fusers for that reason to my knowledge. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #14
    Step aside, noob 1,000+ Posts EarthKmTech's Avatar
    Join Date
    May 2009
    Location
    Gigety
    Posts
    1,973
    Rep Power
    55

    Re: bizhub 458e fusing Unit error code c-3726

    Here in the 240v /50hz part of the world i have still never replaced a fuser on one of these. For a fault anyway- I have changed at life.

    I’ve reset an error twice only and never returned.

    I have however changed just about every drum at 50% life on the 8e series.

    I’m thinking by this, it must be environmental.
    If at first you don't succeed, try the way I told you how to do it in the first place.

  5. #15
    Field Supervisor 500+ Posts
    bizhub 458e fusing Unit error code c-3726


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    964
    Rep Power
    29

    Re: bizhub 458e fusing Unit error code c-3726

    on the bright side no ozone filters lol

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here