Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Jun 2021
    Location
    Kamnik
    Posts
    2
    Rep Power
    0

    Question C3070l wrinkling output paper

    Hi everyone!

    I own a Accuriopress C3070l and the output paper is starting to get wrinkled after we changed the fusing belt. First few copies were ok and then the next day the wrinkling occurred. I am attaching a pic bellow. The paper itself is 330x243 mm 115g.

    Thank you for your help.


    WhatsApp Image 2021-06-10 at 08.23.03.jpg

  2. #2
    Technician lartis.aineias's Avatar
    Join Date
    Dec 2020
    Location
    Thessaloniki
    Posts
    26
    Rep Power
    3

    Re: C3070l wrinkling output paper

    Quote Originally Posted by daadoooo113 View Post
    Hi everyone!

    I own a Accuriopress C3070l and the output paper is starting to get wrinkled after we changed the fusing belt. First few copies were ok and then the next day the wrinkling occurred. I am attaching a pic bellow. The paper itself is 330x243 mm 115g.

    Thank you for your help.


    WhatsApp Image 2021-06-10 at 08.23.03.jpg
    reduce the temperature, slightly disturb the input fusing plate!

    Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk

  3. #3
    Junior Member
    Join Date
    Jun 2021
    Location
    Kamnik
    Posts
    2
    Rep Power
    0

    Re: C3070l wrinkling output paper

    Quote Originally Posted by lartis.aineias View Post
    reduce the temperature, slightly disturb the input fusing plate!

    Στάλθηκε από το AC2003 μου χρησιμοποιώντας Tapatalk
    Will try it, thanks. Could also paper that has been opened for a while cause a problem? Maybe humidity got to it?

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Dec 2009
    Posts
    448
    Rep Power
    45

    Re: C3070l wrinkling output paper

    Agreed, try lowering fusing temperature.
    For years on all machines that 115g paper was nightmare to work with, especialy when output is full black or duplex.
    It just wrinkle when get heat in fuser, wrap arround fusing belt,...humidity make things worse.
    Now we are not using it anymore, replaced with 135g and it is much better.

  5. #5
    Master Of The Obvious 10,000+ Posts
    C3070l wrinkling output paper

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,628
    Rep Power
    375

    Re: C3070l wrinkling output paper

    When you re-assembled the fuser, and you re-installed shoulder screws ... did the shoulder seat properly into the frame? I saw one the other day, that the last tech replaced the shoulder screw with an M4 regular pan head screw. The result is the frame seats 1mm higher, in this case it was the front. And the belt walked to the rear and chewed itself up ... and wrinkled the prints. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Technician
    Join Date
    May 2020
    Location
    Virginia Beach,Va.
    Posts
    35
    Rep Power
    6

    Re: C3070l wrinkling output paper

    I would recheck your installation of the belt and did you change any fuser pressure?

    You said it began right after the installation.

    Let us know.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here