Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Technician
    Join Date
    Oct 2017
    Location
    Tiznit
    Posts
    15
    Rep Power
    0

    Exclamation Blank Line Problem

    Hello,

    So the problem is that a blank line appear on paper, the orientation of papers in tray is landscape, this line does not appear always in the same place, also it appears only one time for each page, you can see the picture attached with this post.
    Machine Model = Bizhub 350
    Thanks.
    Attached Images Attached Images
    Last edited by Omar Faris; 09-16-2021 at 11:39 AM. Reason: incomplet post

  2. #2
    Service Manager 10,000+ Posts
    Blank Line Problem

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,624
    Rep Power
    389

    Re: Blank Line Problem

    Quote Originally Posted by Omar Faris View Post
    Hello,

    So the problem is that a blank line appear on paper, the orientation of papers in tray is landscape, this line does not appear always in the same place, also it appears only one time for each page, you can see the picture attached with this post.

    Thanks.

    What model machine?

    Sent from my SM-G960U using Tapatalk

  3. #3
    Service Manager 1,000+ Posts
    Blank Line Problem


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,511
    Rep Power
    58

    Re: Blank Line Problem

    prob a bug walking around over laser unit

  4. #4
    Technician
    Join Date
    Oct 2017
    Location
    Tiznit
    Posts
    15
    Rep Power
    0

    Re: Blank Line Problem

    Quote Originally Posted by Phil B. View Post
    What model machine?

    Sent from my SM-G960U using Tapatalk

    konica minolta bizhub 350

  5. #5
    Service Manager 1,000+ Posts
    Blank Line Problem


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,511
    Rep Power
    58

    Re: Blank Line Problem

    i wasnt joking about the bug btw ive had baby cockroaches cause this

  6. #6
    Technician
    Join Date
    Oct 2017
    Location
    Tiznit
    Posts
    15
    Rep Power
    0

    Re: Blank Line Problem

    Quote Originally Posted by rrrohan View Post
    i wasnt joking about the bug btw ive had baby cockroaches cause this
    So to fix this i need to clean laser unit or what?

  7. #7
    Senior Engineer Manikandan T's Avatar
    Join Date
    Sep 2019
    Location
    chennai
    Posts
    14
    Rep Power
    5

    Smile Re: Blank Line Problem

    Quote Originally Posted by Phil B. View Post
    What model machine?

    Sent from my SM-G960U using Tapatalk
    i faced it lot of times Check the Mag roller toner and developer not forming some times dust in developer use a business card and swipe left to right between magroller and develop/doctor blade you can see the magic!!!!!

  8. #8
    Service Manager 1,000+ Posts
    Blank Line Problem


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,511
    Rep Power
    58

    Re: Blank Line Problem

    void lines are when a laser fails to hit the drum, the fact its moving suggests the thing blocking it is moving as well which is normal a bug. in my experience a moving fault is a moving bug. mice are dumb and will normally get electrocuted but roaches are survivalists

  9. #9
    Senior Engineer Manikandan T's Avatar
    Join Date
    Sep 2019
    Location
    chennai
    Posts
    14
    Rep Power
    5

    Re: Blank Line Problem

    i faced it lot of times in 250 and 362
    you are using A4 or A4R
    if using A4 Try This
    Check the Mag roller toner and developer not forming some times dust in developer use a business card and swipe left to right between magroller and develop/doctor blade you can see the magic!!!!!

  10. #10
    Service Manager 2,500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    4,498
    Rep Power
    201

    Re: Blank Line Problem

    Quote Originally Posted by Manikandan T View Post
    i faced it lot of times Check the Mag roller toner and developer not forming some times dust in developer use a business card and swipe left to right between magroller and develop/doctor blade you can see the magic!!!!!
    Agree. Actually it's better to empty developer unit on clean sheet of A3 paper, clear doctor-sleeve gap and screen developer and toner material from debris or caked pieces then poor the mix back into developer unit.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here