Results 1 to 4 of 4
  1. #1
    Senior Member 100+ Posts
    Join Date
    Sep 2017
    Location
    Durban
    Posts
    104
    Rep Power
    11

    No boot device found b1100

    Hi,

    We have been having lots of unexpected power outages and loadshedding. As a result when the power returned my B1100 displays a black screen " BOOT NOT DEVICE FOUND".

    I am unable to enter service mode hence I doubt firmware will help at this point. I will try reseat boards tomorrow as this issue occur late this afternoon.

    Has anybody had this error in this group.
    Attached Images Attached Images

  2. #2
    Certified Konica Expert 2,500+ Posts
    No boot device found b1100

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    3,564
    Rep Power
    126

    Re: No boot device found b1100

    firmware is a boot device and once the FW has been loaded, it basically rewrites the OS and it should boot up.
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  3. #3
    Senior Member 100+ Posts
    Join Date
    Sep 2017
    Location
    Durban
    Posts
    104
    Rep Power
    11

    Re: No boot device found b1100

    Quote Originally Posted by Synthohol View Post
    firmware is a boot device and once the FW has been loaded, it basically rewrites the OS and it should boot up.
    Hi,

    I am unable to access service mode to do Firmware. Reseated all connectors and boards still no luck.

    I am now suspecting the SSD, has anybody had an SSD fail on this model?

  4. #4
    Certified Konica Expert 2,500+ Posts
    No boot device found b1100

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    3,564
    Rep Power
    126

    Re: No boot device found b1100

    do you have the service manual?
    also if you hold down utility while booting will it go into service mode?


    you can try ISW firmware method before replacing anything, you hold down the 2 keys to "boot" in ISW mode follow the manual and see if it takes. there is an order of install i think.

    Note
    ▪ When you replace SSD (SSD), perform ISW of the following firmware.
    ▪ Image control (I)
    ▪ Tonic (T)
    ▪ Browser (W)
    ▪ Controller (P)
    ▪ When you replace SSD, perform ISW of the Image control first. When the firmware of the image control is not in SSD, you cannot
    perform other ISW of the firmware.
    ▪ For how to get or replace the SSD, contact the service manager of Konica Minolta.
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here