minolta 363 fuser rebuild element

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • araven666
    Technician
    • Jul 2016
    • 14
    #1

    minolta 363 fuser rebuild element

    Hello,
    while rebuilding minolta 363 fuser unit this element broke off when closing the top cover any suggestions how to fix ? Attaching pics
    0-02-05-b5aebc164716990ac97f516f58414fb07fcfac54edf8ace4dc573bc4e161e7ab_762cb4046d890b49.jpg0-02-05-8257f5d07dd27b97b0eb1e091c70bc80185beedd70aa76fcc3156423204ddc30_7183b849131f2454.jpg

    Thank you in advance
    Tags: fuser, fuser unit, minolta, minolta 363, rebuild
    • allan
      RTFM!!

      5,000+ Posts
      • Apr 2010
      • 5459
      #2
      Re: minolta 363 fuser rebuild element

      Its there to ground the roller. Never had it break a lamp and make the roller live ever. Bend it out of the way or remove it.

      Be careful when reassembling the fuser to help it over or rather under the roller.
      Whatever

        Comment

        • araven666
          Technician
          • Jul 2016
          • 14
          #3
          Re: minolta 363 fuser rebuild element

          The part that broke was a graphite probably not to scratch the roller with direct contact.
          Should I leave the plate to make contact with the roller or remove it in general.
          As far as I can see it falls out of paper printing

            Comment

            • allan
              RTFM!!

              5,000+ Posts
              • Apr 2010
              • 5459
              #4
              Re: minolta 363 fuser rebuild element

              Originally posted by araven666
              The part that broke was a graphite probably not to scratch the roller with direct contact.
              Should I leave the plate to make contact with the roller or remove it in general.
              As far as I can see it falls out of paper printing
              I normal leave it as is. You can remove it. There is a chance that it could make some noise.
              Whatever

                Comment

                • araven666
                  Technician
                  • Jul 2016
                  • 14
                  #5
                  Re: minolta 363 fuser rebuild element

                  Thanks for the help, works fine no issues or error codes, probably will keep an eye for any problems in the future.
                  Left the metal plate under the roller that is the way it turns while printing pages,
                  I probably broke it off when I pulled the top cover of the fuser and didn't even realise it, will be more careful next time
                  Thanks again

                    Comment

                    • copyman
                      Owner / Technician

                      Site Contributor
                      2,500+ Posts
                      • Sep 2005
                      • 4555
                      #6
                      Re: minolta 363 fuser rebuild element

                      Originally posted by Trtet3
                      I recently needed to replace the dv42h5200ep/a3 heating element, and I found the perfect replacement part on this site. The ordering process was easy and delivery was fast. The new heating element fit perfectly and my dryer is working like new again. I am very pleased with the quality of the replacement part. I highly recommend to anyone in need of a replacement heating element!
                      You are in wrong forum. You want the hair stylist forum

                        Comment

                        Previous template Next
                        Working...