Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: image problem

  1. #1
    Senior Tech 100+ Posts
    Join Date
    Nov 2010
    Posts
    110
    Rep Power
    0

    image problem

    Hello I have a c450. And here it is the problem

    I made the Image stabilization+Initialize and the first print become like this:
    initialize+image stabilization.pdf
    After 16 prints looks like this:
    after 16 prints.pdf

    Then I made the gradations adjustments the 3 of them and the first print become like this:
    gradation adjust first copy.pdf
    and after 16 prints looks like this:
    after 16 copies gradation adju.pdf

    The original doc is this:
    capa c março pvz.pdf

    What is this?

    One mor thing in the gradation adjust the Conv. Value I cant never get the Right values! In the tree of them

  2. #2
    Field Supervisor 500+ Posts
    image problem

    minimerlin's Avatar
    Join Date
    Nov 2007
    Location
    Scottish Highlands
    Posts
    851
    Rep Power
    44
    Is this the same fault from a week ago? Are the image units chipped? Is the toner OEM? Has the optics been cleaned? You need to do toner add before you do reset and stabilization followed by the grad adjustment. Make sure that the image that is printed (for the adjustment scan) is of good quality or you are wasting your time! When you have got the settings witin the specs switch off the unit and power up again. Do a test printout from the user mode. If your copy/print quality goes bad after a few copies I suspect a stabilizer problem or old IUs.

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Nov 2010
    Posts
    110
    Rep Power
    0
    ok I gona try that and I tell something thanks!

  4. #4
    Field Supervisor 500+ Posts Zeldaman's Avatar
    Join Date
    Mar 2011
    Location
    Stuttgart/Baden Wuerttemberg
    Posts
    942
    Rep Power
    47
    Hi there!
    I´ve had asimilar problem but the customer uses no original KM-toner and the transferbandunit was to old (not by prints but time!).
    With the new transferunit it became better odd the OEM-toner.
    Greetings....

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here