Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8

Thread: BIZ HUB 951

  1. #1
    Senior Tech 250+ Posts
    Join Date
    Oct 2014
    Location
    wareham.mass
    Posts
    343
    Rep Power
    23

    BIZ HUB 951

    For some reason copies get light fill.Even after a PM...a short time later copies get light.Density doesn't stay at this print shop!!!BIZ HUB  951

  2. #2
    Master Of The Obvious 10,000+ Posts
    BIZ HUB  951

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,469
    Rep Power
    463

    Re: BIZ HUB 951

    What parts did you replace on your PM? Which PM? What simulations did you do? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior Tech 250+ Posts
    Join Date
    Oct 2014
    Location
    wareham.mass
    Posts
    343
    Rep Power
    23

    Re: BIZ HUB 951

    Replaced drum an developer.. 750k density just doesn't stay!

  4. #4
    Master Of The Obvious 10,000+ Posts
    BIZ HUB  951

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,469
    Rep Power
    463

    Re: BIZ HUB 951

    Quote Originally Posted by antone View Post
    Replaced drum an developer.. 750k density just doesn't stay!
    You really ought to change the change at least the corona wires, grid, wire cleaners, drum blades, and do the drum peculiarity adjustments. I would not call drum and developer a complete PM by any stretch of the imagination. You might glance at the PM recommendations in the manual. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Senior Tech 250+ Posts
    Join Date
    Oct 2014
    Location
    wareham.mass
    Posts
    343
    Rep Power
    23

    Re: BIZ HUB 951

    750 pm kit contains all these parts!!!

  6. #6
    Service Manager 1,000+ Posts
    BIZ HUB  951


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: BIZ HUB 951

    did you do the peculiarity like he said?

    also fuser pressure?

    does the quality last at least for while? you may have toner add problems

  7. #7
    Service Manager 250+ Posts Zackuth's Avatar
    Join Date
    Aug 2009
    Location
    Arkansas
    Posts
    449
    Rep Power
    36

    Re: BIZ HUB 951

    You have to run the peculiarity according to the manual. If you miss a certain step, the copies will be light and you'll have to replace the developer again. I don't remember which step, but I missed it on my first PM for these machines.
    If at first you don't succeed, redefine success

  8. #8
    Master Of The Obvious 10,000+ Posts
    BIZ HUB  951

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,469
    Rep Power
    463

    Re: BIZ HUB 951

    Quote Originally Posted by antone View Post
    Replaced drum an developer.. 750k density just doesn't stay!
    Quote Originally Posted by antone View Post
    750 pm kit contains all these parts!!!
    Then perhaps you should install the kit. The way I'm reading your first post, you have "Replaced drum an developer.," Spare me the temper tantrums, please. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here