Kyocera/Copystar CS-4003i boot logo

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • monarke4
    Trusted Tech

    Site Contributor
    100+ Posts
    • Oct 2018
    • 180
    #1

    Kyocera/Copystar CS-4003i boot logo

    The service manual I have from April 2022 Rev.D0 explains that U066 (page 6-25) is the code to enable/disable the "display logo".

    The machine has installed Firmware version 2VK_S000.002.551 2022.08.25 .

    When I enter U066 the description is "Adjust Table Leading Edge Timing".

    So either the option was removed, and/or there is a later version of the service manual available?

    I scrolled through the codes and didn't see anything related to the "display logo" toggle.

    Thanks
    Tags: 4003i, copystar, display logo, kyocera, u066
    • CWP
      Trusted Tech

      100+ Posts
      • Jun 2013
      • 168
      #2
      Re: Kyocera/Copystar CS-4003i boot logo

      You are likely looking for U224 "Setting original panel display". Opening image is what will give you the startup screen. Instructions must be followed exactly; if you don't have the right image size, file type, exact name (it is case sensitive) then you will never have the option to load the file at the machine from USB. If the image size is not correct it just won't look good.

        Comment

        • BillyCarpenter
          Field Supervisor

          Site Contributor
          VIP Subscriber
          10,000+ Posts
          • Aug 2020
          • 16308
          #3
          Re: Kyocera/Copystar CS-4003i boot logo

          Copy the files to an USB-stick and load the files to the machine using U224. The files are :


          callwin_ext_image.png 180x200pix max 1Mb
          callwin_ext_mes_detail.txt
          callwin_ext_mes_top.txt
          opening_ext_image.png 800x400pix max 1Mb


          Use an application like Irfanview to format your image to 800x400 pixels, .png file format, and named exactly as specified. Use simulation U224 to import the image.
          Adversity temporarily visits a strong man but stays with the weak for a lifetime.

            Comment

            • slimslob
              Retired

              Site Contributor
              25,000+ Posts
              • May 2013
              • 36886
              #4
              Re: Kyocera/Copystar CS-4003i boot logo

              Originally posted by BillyCarpenter
              Copy the files to an USB-stick and load the files to the machine using U224. The files are :


              callwin_ext_image.png 180x200pix max 1Mb
              callwin_ext_mes_detail.txt
              callwin_ext_mes_top.txt
              opening_ext_image.png 800x400pix max 1Mb


              Use an application like Irfanview to format your image to 800x400 pixels, .png file format, and named exactly as specified. Use simulation U224 to import the image.
              I wonder,does the image file need to be present before the enable/disable the "display logo" option will show? I mean if nothing is there how can you Enable/Disable displaying it?

                Comment

                • copier tech
                  Field Supervisor

                  5,000+ Posts
                  • Jan 2014
                  • 8105
                  #5
                  Re: Kyocera/Copystar CS-4003i boot logo

                  Originally posted by slimslob
                  I wonder,does the image file need to be present before the enable/disable the "display logo" option will show? I mean if nothing is there how can you Enable/Disable displaying it?

                  By default the device will have the Kyocera logo this can't be deleted you can only replace it.
                  Let us eat, drink, and be merry, because tomorrow we may die!

                  For all your firmware & service manual needs please visit us at:

                  www.copierfirmware.co.uk - www.printerfirmware.co.uk
                  ​

                    Comment

                    • dalewb74
                      Service Manager

                      Site Contributor
                      1,000+ Posts
                      • Feb 2018
                      • 1125
                      #6
                      Re: Kyocera/Copystar CS-4003i boot logo

                      when i did this years ago. once you change that kyocera logo to something new. you can not revert back. so make certain you have the logo you want to use. and as stated above, make sure you follow the steps exactly as described.

                        Comment

                        • slimslob
                          Retired

                          Site Contributor
                          25,000+ Posts
                          • May 2013
                          • 36886
                          #7
                          Re: Kyocera/Copystar CS-4003i boot logo

                          I believe you can, provided that you have a source for the .png file.

                            Comment

                            • BillyCarpenter
                              Field Supervisor

                              Site Contributor
                              VIP Subscriber
                              10,000+ Posts
                              • Aug 2020
                              • 16308
                              #8
                              Re: Kyocera/Copystar CS-4003i boot logo

                              Originally posted by dalewb74
                              when i did this years ago. once you change that kyocera logo to something new. you can not revert back. so make certain you have the logo you want to use. and as stated above, make sure you follow the steps exactly as described.

                              Yes, it can be reverted back.
                              Adversity temporarily visits a strong man but stays with the weak for a lifetime.

                                Comment

                                Previous template Next
                                Working...