Results 1 to 8 of 8
  1. #1
    Technician
    Join Date
    Oct 2010
    Location
    city
    Posts
    32
    Rep Power
    0

    MPC 3001 SC 547 error code

    MPC 3001 give SC 547 code.
    Have replaced a whole heater unit and power supply unit still give the same code.
    According to this error code heater unit not heating up.
    Can IH Inverter Board or IH coil Relay Board gives this error code
    Any suggestion will be much appreciated if anyone has come across this issues.

    Thanks
    alvin

  2. #2
    Hair Straightener Tech 500+ Posts rsyarcia's Avatar
    Join Date
    Feb 2008
    Location
    Nueva Vizcaya
    Posts
    710
    Rep Power
    40

    Re: MPC 3001 SC 547 error code

    check for the continuity of the IH coil. It is also possible that IH inverter board is defective.
    Nobody is perfect..

  3. #3
    Just a tech 250+ Posts keithxxiii's Avatar
    Join Date
    Nov 2014
    Posts
    432
    Rep Power
    23

    Re: MPC 3001 SC 547 error code

    Quote Originally Posted by rsyarcia View Post
    check for the continuity of the IH coil. It is also possible that IH inverter board is defective.
    Agree.. I have experienced this problem before.. It was a defective IH coil unit. Check the continuity of the coil before replacing

  4. #4
    Technician
    Join Date
    Oct 2010
    Location
    city
    Posts
    32
    Rep Power
    0

    Re: MPC 3001 SC 547 error code

    Quote Originally Posted by rsyarcia View Post
    check for the continuity of the IH coil. It is also possible that IH inverter board is defective.
    Thanks I will checked that.

    alvin

  5. #5
    Technician
    Join Date
    Oct 2010
    Location
    city
    Posts
    32
    Rep Power
    0

    Re: MPC 3001 SC 547 error code

    Quote Originally Posted by keithxxiii View Post
    Agree.. I have experienced this problem before.. It was a defective IH coil unit. Check the continuity of the coil before replacing
    I will checked for defective IH coil unit.

    Thanks

  6. #6
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    16,365
    Rep Power
    463

    Re: MPC 3001 SC 547 error code

    Quote Originally Posted by keithxxiii View Post
    Agree.. I have experienced this problem before.. It was a defective IH coil unit. Check the continuity of the coil before replacing
    It could also be the thermostat on the IH coil assembly, see caution in the service manual for replacing the coil. You can check the thermostat by disconnecting from the inverter board. Of course Ricoh does not sell just the thermostat. I have had success bypassing the thermostat at the inverter board while I wait for a new coil comes in.

  7. #7
    Junior Member
    Join Date
    Jul 2020
    Location
    kota bharu kelantan
    Posts
    1
    Rep Power
    0

    Re: MPC 3001 SC 547 error code

    [QUOTE=slimslob;607369]It could also be the thermostat on the IH coil assembly, see caution in the service manual for replacing the coil. You can check the thermostat by disconnecting from the inverter board. Of course Ricoh does not sell just the thermostat. I have had success bypassing the thermostat at the inverter board while I wait for a new coil comes in.

    CAN TRY TO PUT THE THERMOSTAT IN THE FREEZER OR CAN TRY TAPPING SO THAT THE THERMOSTAT CAN BE TURNED ON{USING MULTIMETER}

  8. #8
    Field Supervisor 500+ Posts luca72's Avatar
    Join Date
    Oct 2017
    Location
    Milano, Italia
    Posts
    541
    Rep Power
    28

    Re: MPC 3001 SC 547 error code

    Quote Originally Posted by ttean View Post
    MPC 3001 give SC 547 code.
    Have replaced a whole heater unit and power supply unit still give the same code.
    According to this error code heater unit not heating up.
    Can IH Inverter Board or IH coil Relay Board gives this error code
    Any suggestion will be much appreciated if anyone has come across this issues.

    Thanks
    alvin
    in addition to everything they have suggested, I would try to replace the front panel switch (s), once I went crazy one day for a fucking "signal cross zero" del cazzo.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here