Results 1 to 8 of 8
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jun 2016
    Location
    London
    Posts
    63
    Rep Power
    11

    E25c Fiery Software

    Hi Chaps,

    I have an ongoing issue with a E25c fiery on a IMC device. It keeps dropping off and needs a reboot. All services packs and patch updates have been applied. Also machine firmware is up to date.

    I'm looking at doing a full system software reload on the fiery but it did not come with any disks or USB stick.

    Does anyone know where I get get this from? No part number listed in parts manual and Ricoh new tech web site is not the best.

    HELP!!!

    Batman1976

  2. #2
    Senior Tech 250+ Posts dalewb74's Avatar
    Join Date
    Feb 2018
    Posts
    273
    Rep Power
    12

    Re: E25c Fiery Software

    contact ricoh support. i recently had an issue with a fiery pc. after speaking with support they pointed me to a website to download the fiery software. also in this process it creates a bootable usb device. then you can plug into the pc and run the install from there.

  3. #3
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    14,922
    Rep Power
    409

    Re: E25c Fiery Software

    It sounds to me like the location is getting AC line sags that the Fiery power supply is not able to handle.

  4. #4
    Copier Technician 1,000+ Posts
    E25c Fiery Software

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,239
    Rep Power
    121

    Re: E25c Fiery Software

    Quote Originally Posted by Batman1976 View Post
    Hi Chaps,

    I have an ongoing issue with a E25c fiery on a IMC device. It keeps dropping off and needs a reboot. All services packs and patch updates have been applied. Also machine firmware is up to date.

    I'm looking at doing a full system software reload on the fiery but it did not come with any disks or USB stick.

    Does anyone know where I get get this from? No part number listed in parts manual and Ricoh new tech web site is not the best.

    HELP!!!

    Batman1976
    This one does come with usb or disks you are ment to do backup on installation just follow manual and do a factory reset make sure it connected to copier follow service manual quite easy

  5. #5
    Copier Technician 1,000+ Posts
    E25c Fiery Software

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,239
    Rep Power
    121

    Re: E25c Fiery Software

    Hi batman 1976 how did you get on I did notice you on ricoh technical as well.

  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Jun 2016
    Location
    London
    Posts
    63
    Rep Power
    11

    Re: E25c Fiery Software

    Quote Originally Posted by mga View Post
    Hi batman 1976 how did you get on I did notice you on ricoh technical as well.
    Yeah, so with these new fiery devices you need to register for the EFI Fiery Sales Portal (24-48hrs). You then need to download the Fiery INSTALL BUILDER. The fiery system software is then downloadable from here. it then creates a bootable USB which enables you to restore the software using the manual.

    Looks like EFI/Ricoh are going away from supplying DVD's with Software on them.

    Thanks all

  7. #7
    Senior Tech 250+ Posts
    Join Date
    Sep 2009
    Posts
    261
    Rep Power
    32

    Re: E25c Fiery Software

    This fiery has a restore partition on the hdd. I know you can get a "service" manual on the tsrc for it. You would need to follow instructions on the manual. Not certain, but I believe you web into fiery ip and select restore from there. I know you can create a bootable flash drive image from there.

    Fiery's suck.
    Sex with my wife is like driving a Ferarri at 190 m.p.h.
    Yeah, I don't get to do that either


    My luck they will bury me with a winning lottery ticket in my pants pocket

  8. #8
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    14,922
    Rep Power
    409

    Re: E25c Fiery Software

    Quote Originally Posted by Batman1976 View Post
    Yeah, so with these new fiery devices you need to register for the EFI Fiery Sales Portal (24-48hrs). You then need to download the Fiery INSTALL BUILDER. The fiery system software is then downloadable from here. it then creates a bootable USB which enables you to restore the software using the manual.

    Looks like EFI/Ricoh are going away from supplying DVD's with Software on them.

    Thanks all
    I don't know about the UK but here across pond a tech with a Ricoh Family Group can down load a service set of images from the service websites. It includes the USB image and both of the DVD images. Ricoh will also pay for the EFI training needed to qualify to register with their sales portal.

    Now who lost the software that came with the Fiery when it was first sold? It is supposed to be kept with the hardware and the customer told to keep it available.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here