9003 blank image

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mikadonovan
    Senior Tech

    Site Contributor
    2,500+ Posts
    • May 2008
    • 2931
    #1

    9003 blank image

    Hi, All. I have a MP 9003 with blank prints. New pcu and charger, new development unit have been installed with no joy. There is no image on the drum. Anyone run into this before?
    NEVER ASSUME ANYTHING
    Tags: blank, drum, image, run
    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 36906
      #2
      Re: 9003 blank image

      Seeing as how the laser process is write to no charge, if there was a problem with the charge corona or the HVPS you would be getting all black. My guess would be toner haze or dust build up on the laser shield glass on a problem with transfer current.

        Comment

        • anothertech
          Service Manager

          Site Contributor
          1,000+ Posts
          • Nov 2007
          • 1757
          #3
          Re: 9003 blank image

          Watch it with the doors cheated. Is the developer unit turning? Is the developer unit in good contact with the drum? I've caused the problem myself before by not having the developer unit seated correctly.

            Comment

            • mikadonovan
              Senior Tech

              Site Contributor
              2,500+ Posts
              • May 2008
              • 2931
              #4
              Re: 9003 blank image

              This box has a lot of miles on it. We are just going to replace it.
              NEVER ASSUME ANYTHING

                Comment

                Previous template Next
                Working...